Table of Contents
Have you ever put on your Powerbeats Pro earbuds, excited to start your workout, only to find that one side isn’t working? It’s a common problem that can quickly ruin your exercise routine. But don’t worry – there are easy fixes you can try.
Many users have solved this issue by cleaning their earbuds and charging case. Dirt, sweat, and debris can build up over time, causing connection problems. A quick wipe with a soft cloth might be all you need to get both sides working again.
If cleaning doesn’t do the trick, try resetting your Powerbeats Pro. This often solves pairing issues that can cause one earbud to stop working. With these simple steps, you’ll be back to enjoying your favorite tunes in no time.
Why only one side of Powerbeats Pro Working?
Powerbeats Pro users sometimes find that only one earbud works. This can happen for a few reasons. Let’s look at some common causes.
One Earbud is not charging
Sometimes, one earbud doesn’t charge properly. This can make it seem like only one side is working.
Check if both earbuds light up when placed in the case. If one doesn’t, try cleaning the charging contacts. Use a soft, dry cloth to wipe the earbud and case contacts gently.
Make sure the earbud sits correctly in the case. A poor fit can stop it from charging. Try taking the earbud out and putting it back in.
If cleaning doesn’t work, the battery might be dead. Let the earbuds charge for at least 15 minutes before trying again.
Pairing Issue with Smartphone
Pairing problems can cause one earbud to stop working. This happens when your phone doesn’t connect to both earbuds.
Try forgetting the Powerbeats Pro in your phone’s Bluetooth settings. Then pair them again. Put both earbuds in the case and close it. Open the case near your phone and follow the on-screen steps to pair.
If that doesn’t work, reset your Powerbeats Pro. Press and hold the button on the case for 15 seconds until the LED light flashes. Then try pairing again.
Make sure your phone’s software is up to date. Old software can cause pairing issues.
Physical or Water Damage
Damage to one earbud can make it stop working. This includes drops, bumps, or water exposure.
Look for signs of damage like cracks or dents. Check if the earbud got wet during a workout or in the rain.
If you see damage, the earbud might need repair. Water damage can sometimes be fixed by letting the earbud dry out completely. Put it in a dry place for 24-48 hours before trying to use it again.
For serious damage, you might need to contact Beats support or Apple for help. They can guide you on repair options or replacement.
Step-by-Step Guide: Fix Only One Side of Powerbeats Pro Working
Got a Powerbeats Pro earbud that’s not working? Don’t worry! Here are some easy steps to get both earbuds playing music again.
Check Battery Levels in Both Earbuds
First, make sure both earbuds have enough power. Open your phone’s Bluetooth settings and look for the battery levels of each earbud.
If one shows a low battery, put both earbuds in the charging case for at least 15 minutes. This should give them enough juice to work properly.
Sometimes the battery indicator might be wrong. Try using both earbuds even if one shows as empty. If it works, the battery reading was likely off.
Proper Placement in Charging Case
Putting your Powerbeats Pro in the case correctly is super important. Each earbud has its own spot.
Make sure they click into place when you put them in. The lights on the case should turn on to show they’re charging.
If the earbuds aren’t seated right, they might not charge or reset properly. This can cause one side to stop working.
Take them out and put them back in a few times to be sure they’re in the right spot.
Cleaning Charging Contacts and Pins
Dirt and sweat can mess up your Powerbeats Pro. The charging contacts need to be clean for everything to work right.
Use a soft, dry cloth to gently wipe the metal parts on the earbuds and in the case. Be careful not to get any liquid inside.
For tough grime, try a cotton swab with a tiny bit of rubbing alcohol. Make sure everything is totally dry before using the earbuds again.
Clean earbuds charge better and connect more easily to your devices.
Reboot and Reset
If cleaning doesn’t help, try resetting your Powerbeats Pro. This can fix many problems.
To reset:
- Put both earbuds in the case.
- Leave the lid open.
- Press and hold the button inside the case for 15 seconds.
- The LED light will flash red and white.
- Close the lid and wait 30 seconds.
After resetting, pair your Powerbeats Pro with your phone again like they’re brand new.
Contact Support and Claim Warranty
If none of these steps work, it might be time to get help from the experts.
Call or chat with Beats support. They can guide you through more advanced fixes.
If your Powerbeats Pro are less than a year old, they’re probably still under warranty. Beats might replace them for free if there’s a real problem.
Keep your receipt handy when you contact support. They’ll need it to check your warranty.
Hi, I’m Rohit. I am a computer engineer, who loves to talk and learn about new technologies.